工艺特点：
1、 集粉碎、干燥、分级于一体，连续化生产。
2、 设备紧凑，体积小，生产能力大。
3、 单位产品能耗低，干燥强度大。
4、 干燥时间短。
Process features：
1. Combining crushing, drying and classification, realize continuous production.
2. With compact structure and small dimension, it has large production capacity.
3. Lower unit energy consumption and higher drying strength.
4. With short drying time (3-10s), it’s also applicable for temperature sensitive materials.
工艺流程图及工作原理：
空气经加热后按一定速度（风速由物料比重、粘度、含水率等综合指数确定），从椎体底部进入干燥器，由螺旋加料器送入物料被安装在椎体底部呈高速旋转工作状态的粉碎装置将物料破碎成微粒状，在气固沸腾中同热空气充分接触，快速干燥，合理的风速也有效调节了微粒的细度与干燥效果，成品粉碎随气流进入旋风分离器进行气固分离，含尘气体经袋滤器除尘后由引风机排出。
Scheme of process flow and its working principle:
Heated air enters into the dryer from bottom of cone as per certain speed(that is dependent on comprehensive indexes including specific gravity, viscosity and moisture content of material),material fed by spiral feeder is crushed into the particles by high speed rotating crushing device installed at the bottom of the cone, which touch hot air sufficiently during gas-solid boiling and thus being dried speedily ,reasonable air speed can adjust the fineness and drying effect of particles efficiently .Finished powdery material enters into cyclone separation along with the air current and the dusty air is exhausted by draught fan after cleaning by bag filter.
A 型：
二级干燥器，能对未干物料补充干热空气作二次干燥，使成品水分能有效控制在0.1％以下，尤其适合低温、热敏性、高湿度物料的干燥。
2nd phase dryer that adds dry and hot air to the material for 2nd time drying can make the moisture content of the finished product controlled under 0.1％,which is esp. applicable for drying of low temperature, heat sensitive and high humidity materials.
B 型：
适用范围：本产品适用于染料、颜料、涂料、农药、橡胶助剂、矿山等行业的高湿度、高粘度、热敏性的膏糊状、滤饼状、块状、粉状物料的连续干燥，成品均为粉状物。
This process is applicable for continuous drying of high humidity, high viscosity and temperature sensitive pasty, filter cake, lump and powdery materials in such trades as dyestuff, pigment, paint, agricultural chemicals, rubber assistants and mining etc., finished product is of powder.
除尘器的配置：根据物料的特点，可选用布袋除尘器、水浴除尘器或湿喷除尘器作二级除尘设备。
Cleaner: According to features of material, bag collector or wet spraying dust cleaner can be used as 2nd phase dust cleaning equipment.
加热方式：根据厂家具备的条件及物料所能承受温度考虑选择使用蒸气、电或热风炉加热作电源。
Steam, electricity or heat air furnace heating can be selected as heat source according to factory conditions and allowed temperature of the material.
干燥物：农药（多灵菌、苯菌灵、阿特拉津、草甘磷、福美胂、福美双、三环唑、季戌四醇等）染料、颜料（酸性染料、直接染料、还原淀蓝、酞菁绿、铬黄）橡胶促进剂（CZ、TMTD、DM等）
Pesticides: carbendazim, benomyl, atrazine, glyphosate, asomate, thiram, tricyclazole etc.
Dyestuff and pigment:(acid dyestuff ,alkali dyestuff, direct dyestuff, recovery,)
Inorganic chemical:(zeolite, aluminum hydroxide, titanium white)
Rubber accelerant: (CZ ,TMTD,DM etc.)
免责声明: 本站资料及图片来源互联网文章,本网不承担任何由内容信息所引起的争议和法律责任。所有作品版权归原创作者所有，与本站立场无关，如用户分享不慎侵犯了您的权益，请联系我们告知，我们将做删除处理！